TC-7228 Dual Receiver Direction Finder Processor
Description + Features + Specifications
Description
The TC-7228 is intended for mobile operation where covert location of surveillance equipment is required. The unit can be controlled remotely or locally using the TC-3518 Remote Operating Unit, a color touch-screen device.
The single package includes the DF processor, a miniature Windows 7 PC and two (2) receivers. The dual-receiver design allows the user to continuously monitor one frequency in the DF mode while using the second receiver for acquisition or band scope use.
In conjunction with the TC-3518, a mapping option is available. This includes a GPS and flux-gate compass. This configuration allows for smooth moving-map operation. LOB storage and audio recording are also accommodated.
Features
- Continuous Coverage of 100KHz to 3000MHz (Limited by reciever/DF Antenna)
- Dual Receivers
- Automatic Antenna Band Switching
- Ethernet
- Built In PC
Specifications
General Specifications
- Physical Dimensions
- 12.00″H x 9.00″ W x 15.00″ D
- 30.5 cm x 23.0 cm x 38.1 cm
- Weight
- 23 lbs (10.5kg). Approx.
- DF Processing Technique
- Phase/Amplitude electronic rotating goniometer, digitally processed
- Receiving Frequency Range(s)
- 100KHz – 3000MHz
- DF Frequency Range(s)
- 2MHz – 3000MHz
- Signal Formats
- AM, NFM, WFM, SSB, CW
- Signal Bandwidths
- Determined directly by receiver
- Sensitivity
- 6dB signal-to-noise ratio for a bearing indication
- Instrument Processing Accuracy
- ±1 degree
- Instrument Processing Resolution
- 1 degree
- Response Time
- Better than 100 msec
- Bearing Display Memory
- Automatically stores last LOB on front panel display on signal loss
- Calibration
- Automatic, internally generated signal simulating 0 degrees
- Operating Temperature Range
- 0 degrees to +50 degrees C
- Non-Operating Temperature Range
- -20 degrees to +70 degrees C
- Humidity
- 0 to 95%
Rear Panel Connectors
- Power Switch
- Toggle Switch
- Power Input
- +12VDC (10-14.5VDV=C) 10A Max 4-pin PowerPole
- Antenna Control
- MIL multipin (15 Pin)
- RF Input
- TNC
- OMNI Input
- N
- Ethernet
- RJ45 Port
- USB
- 3 USB Ports
- Audio Out
- 1/8″ port
- Remote Display Power
- Co-axial (12VDC)