TC – 5025C/3

Features + Specifications

tc5025BWB

Features

  • 3 Band Coverage, 200KHz to 30MHz, VHF, UHF
  • Automatic Antenna Band Switching
  • 406 MHz EPIRB Message Decoding
  • NMEA-0183 Output, Ver 2.1, ADF Message
  • Color Touch Screen Display
  • RS-232 Control (optional)
  • Variable Bearing Integration Speed
  • Ethernet Control (optional)

Specifications

General Specifications

Physical Dimensions
5.25″H x 19.00″ W x 19.80″ D
Weight
17 lbs. Approx.
DF Processing Technique
Phase/Amplitude (HF), and Pseudo Doppler (VHF, UHF), digitally processed
Frequency Range(s)
200KHz – 30MHz
108MHz – 176MHz
220MHZ – 470MHz
Signal Formats
AM, NFM, WFM, SSB, CW
Signal Bandwidths
Determined directly by reciever
Sensitivity
6dB signal-to-noise ratio for a bearing indication
Instrument Processing Accuracy
1 degree
Instrument Processing Resolution
1 degree
Response Time
Better than 100 msec
Bearing Display Memory
Automatically stores last LOB on front panel display on signal loss
Operating Temperature Range
0 degrees to +50 degrees C
Non-Operating Temperature Range
-20 degrees to +70 degrees C
Humidity
0 to 95%

Front Panel Connectors

Phones
Phone Jack for headphones with spring loaded dust cover (Deactivates speaker when headphones jack is inserted.)

Front Panel Display

Azimuthal DF Bearing
3-digit output with 1 degree resolution
Relative DF Bearing
360 segement compass format with 1 degree resolution
Active or Memory Bearing
White trace and 3-digit azimuth: Active
Red trace and 3-digit azimuth: Memory
Signal Strength
10 segement colored meter

Front Panel Controls

Power
ON: Push button switch
OFF: Hold Power Button for 3 seconds or at touch screen display
Volume
Adjusts reciever audio volume for headphones or front speaker
Squelch
Sets reciever squelch for monitor or frequency scan routines
Tuning
Receiver tuning at touch screen or with keypad entry
Brightness and Contrast
Adjusted at touch screen
Amplifier
ON/OFF selectable at touch screen display
DF Mode
DF/OMNI selectable at touch screen display
Bearing Offset
000 or operator set (000-359)
DF Speed
Fast/Slow/Track selectable at touch screen display
Detection mode
Selectable at touch screen display
Tuning Step Size
100 Hz to 999 KHz setable at touch screen display

Rear Panel Connectors

Power Input
+12VDC 2-pin CPC
Antenna Control
MIL multipin (15 Pin)
RF Input
TNC
RS-232
9-Pin D Female Subminiature
NMEA Output
9-Pin D Male Subminiature
Ethernet
RJ-45