Skip to content
- Continuous Coverage of 200KHz to 3000MHz
- Automatic Antenna Band Switching
- Compact and light design
- Color Screen Display
- Optional RS-232 Control
- Variable Bearing Integration Speed
Specifications
General Specifications
- Physical Dimensions
- 4.00″H x 11.00″ W x 9.75″ D
- Weight
- 8 lbs. Approx.
- DF Processing Technique
- Phase/Amplitude electronic rotating goniometer, digitally processed
- Frequency Range(s)
- 200KHz – 3000MHz
- Signal Formats
- AM, FM, SSB, CW
- Signal Bandwidths
- Determined directly by receiver
- Sensitivity
- 6dB signal-to-noise ratio for a bearing indication
- Instrument Processing Accuracy
- 1 degree
- Instrument Processing Resolution
- 1 degree
- Response Time
- Better than 80 msec
- Bearing Display Memory
- Automatically stores last LOB on front panel display on signal loss
- Calibration
- Automatic, internally generated signal simulating 0 degrees
- Operating Temperature Range
- 0 degrees to +50 degrees C
- Non-Operating Temperature Range
- -20 degrees to +70 degrees C
- Humidity
- 0 to 95%
Front Panel Connectors
- Antenna Control
- MIL multipin (15 Pin)
- RF Input
- TNC Connector
- Audio Output
- 5-pin circular MIL Headphone Connector
Front Panel Display
- Color Display
- 5″ Liquid Crystal Display of receiver and direction finding operating parameters plus Line of Bearing
- Azimuthal DF Bearing
- 3-digit output with 1 degree resolution
- Relative DF Bearing
- 360 segement compass format with 1 degree resolution
- Active or Memory Bearing
- White trace and 3-digit azimuth: Active
Red trace and 3-digit azimuth: Memory - Signal Strength
- 10 segment colored meter
- Mode
- Direction finding or OMNI
- Antenna Mounting
- Air or Ground
- DF Integration Speed
- Selectable, 1-99 Samples before displayed
Front Panel Controls
- Power
- Pushbutton. Push for on. Hold for off
- Squelch
- Pushbutton keypad for Frequency and receiver parametr input, and DF processor selectale functions
- Volume
- Rotary control knob for internal receiver or factory integrated external receiver
- Squelch
- Rotary control knob for internal receiver or factory integrated external receiver
- Tuning
- Receiver tuning with keypad entry
- Brightness and Contrast
- Adjusted with keypad entry
- Amplifier
- ON/OFF selectable with keypad entry
- DF Mode
- DF/OMNI selectable with keypad entry
- Bearing Offset
- 000 or operator set (000-359) with keypad entry
- Detection mode
- Selectable with keypad entry
Rear Panel Connectors
- Power Input
- +12VDC, (10-20 Vdc) 110/120V AC with optional Battery Eliminator
- Remote Control (option)
- Optional 9-pin D Femal Subminiature
